Maintenance; Recommended Maintenance Schedule(S) - Toro Multi Pro 5800-D Operator's Manual

Maintenance

Download a free copy of the electrical or hydraulic schematic by visiting www.Toro.com and searching for your
machine from the Manuals link on the home page.
Note:
Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 5 hours
After the first 8 hours
After the first 50 hours
After the first 100 hours
After the first 200 hours
Before each use or daily
Every 50 hours
Every 100 hours
Every 150 hours
Every 200 hours
Maintenance Procedure
• Replace the hydraulic-fluid filters.
• Torque the wheel-lug nuts.
• Change the rear planetary-gearbox fluid.
• Check the fan/alternator belt.
• Change the engine oil and oil filter.
• Check the fuel lines and connections.
• Follow the guidelines for breaking in a new sprayer.
• Pack the front wheel bearings.
• Check the tire air pressure.
• Check the brakes.
• Clean the suction filter.
• Clean the pressure filter.
• Check the tank straps.
• Check the air cleaner.
• Check the engine oil.
• Check the coolant level.
• Check the hydraulic-fluid level.
• Lubricate the pump.
• Lubricate all grease fittings.
• Lubricate the front steering and suspension.
• Lubricate all grease fittings.
• Check the battery-cable connections.
• Lubricate the boom hinges.
• Replace the air-filter element.
• Torque the wheel-lug nuts.
• Inspect the condition and wear of the tires.
• Check the cooling-system hoses for wear and damage.
• Check the fan/alternator belt.
• Change the engine oil (including synthetic oil) and oil filter.
• Check front wheel toe-in.
• Inspect all hoses and connections for damage and proper attachment.
• Clean the radiator fins.
• Clean the flow meter (more often when using wettable powders).
45