Lubrication; Greasing The Spray Pump; Greasing The Steering And Suspension; Greasing The Boom Hinges - Toro Multi Pro 5800-D Operator's Manual

Lubrication

Greasing the Spray Pump

Service Interval: Every 50 hours—Lubricate the
pump.
Every 50 hours/Yearly (whichever comes first)
Grease Type: Mobil XHP 461.
1. Wipe the 2 remote grease fitting clean
66).
Figure 66
1. Back of the machine
2. Spray pump
2. Pump grease into the remote grease fitting
(Figure 66).
3. Wipe off the excess grease.
Greasing the Steering and
Suspension
Service Interval: Every 50 hours—Grease the
steering and suspension.
Every 50 hours/Yearly (whichever comes first)
Grease Type: No. 2 lithium grease. Toro Premium
All-Purpose Grease is available from your authorized
Toro distributor.
•
Steering cylinder—2 grease fittings at each rod
end of the cylinder
•
Steering rod—2 grease fittings at each rod end
•
Spindle pivot—2 grease fittings at each side of the
machine
1. Wipe the grease fittings clean
Figure 68).
2. Pump grease into the grease fittings
and Figure 68).
3. Wipe off excess grease.
(Figure
g204693
3. Grease point (2)
(Figure 67 and
(Figure 67
Note:
The grease fittings positions are
illustrated in Figure
1. Grease fitting
There are 2 fittings at each front wheel.
1. Grease fittings

Greasing the Boom Hinges

Service Interval: Every 100 hours
Important:
If you wash the boom hinges with
water, remove all water and debris from the hinge
assembly and apply fresh grease.
Grease Type: No. 2 lithium grease.
1. Wipe the grease fittings clean so that foreign
matter cannot be forced into the bearing or
bushing.
2. Pump grease into the bearing or bushing at
each fitting (Figure
54
67.
Figure 67
Figure 68
69).
g187456
g187457