Configuration Examples - NEC BladeServer Express5800 Series User Manual

4-4 Configuring Your Server

Configuration Examples

The following describes examples of the configuration settings required to use software-link
features or for system operations.
Date and Time
To change system date or time
Select [Main] – [System Time] and [System Date].
Set the correct date and time before using the system.
Link with Management Software
To control the power supply of the CPU blade with NEC ESMPRO Manager via the
network
Select [Advanced] – [Advanced Chipset Control] – [Wake On LAN/PME] – [Enabled].
Boot
To change the boot order of devices connected to the CPU blade
Select [Boot] and specify the boot order.
To display POST check results
Select [Advanced] – [Boot-time Diagnostic Screen] – [Enabled].
You can also press Esc while the NEC logo is on the screen to display POST check
results.
To use the remote wake-up feature
Via Modem:
[Advanced] – [Advanced Chipset Control] – [Wake on Ring] – [Enabled]
Via LAN:
[Advanced] – [Advanced Chipset Control] – [Wake on LAN/PME] – [Enabled]
Via optional card:
[Advanced] – [Advanced Chipset Control] – [Wake on LAN/PME] – [Enabled]
Via RTC alarm:
[Advanced] – [Advanced Chipset Control] – [Wake on RTC Alarm] – [Enabled]
To control from the HW console
Select [Server] – [Console Redirection] and configure each item.