User Support - NEC BladeServer Express5800 Series User Manual

1-10 Notes on Using Your Server

USER SUPPORT

If the server does not function correctly, do the following before requesting repair:
1.
Check that the power cord and the cables to other devices are properly connected.
2.
See Chapter 8 to check whether your problem is described. If it is, follow the
recommended procedure to resolve it.
3.
Check that the software required for operation of the server is properly installed.
If the server still does not work properly after you have taken the above actions, consult with your
service representative immediately. Take note of the lamp indications of the server and alarm
indications on the display unit before consultation, which may provide information to your service
representative.