Configuration Examples - NEC Express5800/R320a-E4 User Manual

4-6 System Configuration

Configuration Examples

The following describes examples of configuration required to use software-link features or for
system operations.
UPS
To link power supply with the UPS
To power on the server when power is supplied from the UPS
Select [Server] - [AC-LINK] - [Power On].
To keep the server off-powered even when power is supplied from the UPS if the POWER
switch was used to power off
Select [Server] - [AC-LINK] - [Last State].
To keep the server off-powered even when power is supplied from the UPS
Select [Server] - [AC-LINK] - [StayOff].
Keyboard
To set Num Lock
Select [Advanced] - [I/O Device Configuration] - [NumLock]
Security
To set passwords on the BIOS level
Select [Security] - [Set Supervisor Password] and enter a password.
Select [Security] - [Set User Password] and enter a password.
Set Supervisor password first, then User password.
Optional PCI–related devices
To enable Option ROM of the PCI card (option) installed on the server
Select [Advanced] - [Option ROM Configuration] - [PCI Slot n (....)] - [Enabled].
n: Slot number to install the board