NEC BladeServer Express5800 Series User Manual page 185

Removal
To remove the mezzanine card, follow the procedure below:
1.
Shutdown the CPU blade and turn off the power.
2.
Remove the CPU blade from the Blade Enclosure.
Refer to the User's Guide of the Blade Enclosure.
3.
Place the CPU blade on an anti-static sheet.
4.
Remove the two screws securing the rear cover.
5.
Firmly hold the cover, move it slightly toward the rear of the CPU blade, and then lift the
cover to remove it.
6.
Remove the three screws securing the mezzanine card.
7.
Hold both ends of the mezzanine card and remove it from the slot.
Lift the card straight up from the CPU blade.
8.
Replace the rear cover.
9.
Secure the rear cover with the two screws.
10.
Install the CPU blade in the Blade Enclosure according to the User's Guide of the Blade
Enclosure.
Type I
Upgrading Your Server 9-23
Type II