Heinner HEM-DL1470BK Instruction Manual page 27

Espresso maker with frothing device
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 22
www.heinner.com
IMPORTANT – PRIME THE UNIT
To prime unit, run the steam cycle for 90 seconds by following the steps below:
1. Fill water reservoir between the "Min" and "Max" levels.
2. Fill the milk reservoir with water between the "Min" and "Max" levels.
3. Select one of the filters and place it on the porta-filter. Place the porta-filter in the unit
ensuring it is properly locked and place a cup under it. Also, make sure the tip of the frothed
milk dispensing tube is inside the cup.
4. Plug the appliance into the appropriate outlet.
5. Turn the power button on "I".
6. The three control panel lights will start blinking. Once these lights become solid, press
the cappuccino button twice.
7. Once this process is completed, the three control panels will turn on solid.
Now your unit has been primed and is ready to be used.
SELECTING THE RIGHT CUP
Before preparing your beverage, please make sure to select the right cup size according to
the following table:
BEVERAGE
Espresso
Cappuccino
Latte
SELECTING THE RIGHT COFFEE
THE COFFEE
The coffee should be freshly ground and dark roasted. You may want to try a French or Italian
roast ground for espresso. Pre-ground coffee will only retain its flavor for 7 – 8 days, provided
it is stored in an airtight container and in a cool, dark area. Do not store in a refrigerator or
freezer. Whole beans are recommended to be ground just before use. Coffee beans stored in
an airtight container will keep its flavor for up to 4 weeks.
1230-1470W, 50Hz, 220-240V
Single
Double
Single
Double
Single
Double
AMOUNT
35ml
70ml
170ml
285ml
340ml
425ml
26

Advertisement

Table of Contents
loading

Table of Contents