Heinner HEM-DL1470BK Instruction Manual page 30

www.heinner.com
PLACE THE PORTA-FILTER
a. Position porta-filter underneath the brew head, attach porta-filter by first moving retainer
clip back.
b. Position handle so that the handle lines up with the open lock icon "
fits into the groove.
c. Then, slowly turn it to the right until the retention clip is aligned with the closed lock
symbol " " on the unit.
Note: The frothing tube is very hot, please take care.
PLACING THE CUP(S)
a. Pull out the height adjustment tray if you are using a small "demitasse" cup to brew
espresso.
b. Keep the height adjustment tray inside its compartment if you are using a larger cup to
brew cappuccino.
c. Keep the height adjustment tray inside its compartment if you are using a larger cup to
brew latte.
CAUTION: When brewing cappuccino or latte, please make sure to adjust the frothing tube
lever in order to position the froth milk dispensing tube inside the cup to be used.And you
can clean it by rotating it out, then fix it in.
1230-1470W, 50Hz, 220-240V
Turning the unit ON
a. Make sure unit is plugged in.
b. Turn unit on "I".
The three control panel lights will start blinking
during heating and until the water reaches the
perfect temperature. Once these lights become
solid, the unit is ready to use.
" on the unit and
29