Particle Counter Navigation - Beckman Coulter MET ONE 3411 User Manual

Particle counter navigation

The functions of the particle counter are accessed from the Counter
Navigation screen. Table 1 shows the functions that are accessible
through the navigation screen.
Table 2 shows the functions of the other icons.
Table 1 Icons - Counter Navigation screen
Icon Function Description
Sample Measure particle counts. Refer to
counts on page 32.
Historical Review measurement results in the buffer; print, export
or filter data. Refer to
on page 36.
Export Output file as PDF, comma separated value (CSV), tab
separated, XML or PortAll files. Refer to
on page 36.
Printer Print sample data as hard-copy. Refer to
Print Center
Test wizard Test and report wizard for ISO, EU-GMP, FS or BS
classification compliance. Refer to
Report Wizard
Locations Add/edit/remove areas; copy location settings, edit
locations settings; edit alarms for specific locations.
Refer to Location management
Group Load/add/edit a group; delete a group. Refer to
management
Measure particle
Review historical buffer data
Export data
How to use the
on page 34.
Set up the Test and
on page 33.
on page 26.
Group
on page 28.
Table 1 Icons - Counter Navigation screen (continued)
Icon Function Description
System Time/Date; Sleep time/backlight timeout; set logon
requirements; set sounds for alarms; manage users; set
the units for flow rates; manage the data buffer. Refer to
Configure the system
Diagnostics View diagnostic information for troubleshooting. Refer to
Diagnostics and Troubleshooting
Network Configure the network and communication settings.
Refer to About network and communications setup
on page 20.
Factory View the factory information including the calibration
date. Refer to
Table 2 Icons – general
Icon Function
Logout
Go back
Run
Stop
on page 22.
on page 40.
Factory settings on page 40.
Description
Log out the current user
Go to the previous screen
Start sampling
Stop sampling
English 19