Stopping A Log - GE DigitalFlow DF868 Programming Manual

March 2008

Stopping a Log

Procedure Options
3-8
STOP
Use the submenu to terminate a logging process that is currently
active. Press the appropriate side of the
desired pane of the display screen, and complete the following steps:
1. To access the Log Menu, press
a. If you have activated the security feature (see Chapter 1,
Programming Site Data, page 1-63 for details), enter the
assigned password and press
Note: Once a log is stopped it cannot be restarted, but the log
remains in memory. To clear the log from memory, refer to
Chapter 5, Clearing Data, page 5-4, for instructions.
[F3] STOP.
2. Press =
3. Use the [←], [→] and
Note: At the
NAME
prompt, the option bar will show the names of all
completed or active log files that are currently stored in
memory. Recall that a flashing asterisk (*) appears at the far
right of the locator bar if the Model DF868 is currently
logging data (see Chapter 3, Operation, of the Startup Guide).
[F1]
4. Press to continue logging and return to the initial Log Menu
[F2]
screen. Press to stop logging and return to the initial Log Menu
screen.
Do one of the following:
• [F4]
Press [F1]- to enter another
• [EXIT]
Press to return to the data screen.
[SCREEN]
key to activate the
[LOG]
.
[ENT]
.
[F1]-[F4]
keys to select a log file to stop.
[LOG]
submenu.
Logging Data