The Log Submenu; Entering The Log Submenu - GE DigitalFlow DF868 Programming Manual

The LOG Submenu

Entering the LOG
Submenu
Displaying Data
LOG
The submenu permits the display of the data in a log file either
graphically or numerically. Although the Model DF868 can display
all of the data in a log file, screen size limitations prevent the
simultaneous display of the complete log file. Therefore, the function
keys must be used to view the remaining data.
Follow the instructions in this section to display a log file in the
desired format. See Chapter 3, Logging Data, for instructions on
creating a log file.
Press the appropriate side of the
pane of the display screen, and complete the following steps:
1. To access the Display Menu, press the
[F4] LOG
2. Press = .
3. Use the [←], [→] and
NAME
display. At the
of all log files that are currently stored in memory. If there are no
log files currently stored in memory, the following prompt will
appear instead:
DISPLAY FEATURES
DISPLAY FORMAT
logging
All Logs Cleared!
hit key
All Logs Cleared!
If the prompt appears, at least one log file must be
created and stored in memory before the Display Log function can be
accessed. See Chapter 3, Logging Data, for instructions on creating a
log file. After at least one log file is stored in memory and selected at
NAME
the prompt of the
4. At the Format prompt, press
numeric format or press
graphical format.
• [F1]
If you pressed , go to the next page.
• [F2]
If you pressed , go to page 2-9.
[SCREEN]
key to activate the desired
[DISP]
key.
[F1]-[F4]
keys to select the desired log file to
prompt, the option bar will show the names
There are no log files currently
stored in memory. Either all of
the log files have been cleared or
no log files have yet been
created. Press any key to return
to measurement mode.
LOG
submenu, proceed to the next step.
[F1]
to display the selected log in
[F2]
to display the selected log in
March 2008
2-7