Setting Up The Communications Port - GE DigitalFlow DF868 Programming Manual

March 2008
Setting Up the
Communications Port
C-2
Use the steps below to establish communications with the DF868.
1. Open the "New Meter Browser" window and expand the network
tree. Then, highlight the My Computer(Name) branch by clicking
on it.
2. Pull down the "Edit" menu by clicking on it in the menu bar.
3. Click on the "New" menu option to select it, and a submenu opens
with two choices on it (see Figure C-1 below).
Figure C-1: Edit Menu
Programming with PanaView