GE DigitalFlow DF868 Programming Manual page 23

Procedure Options
Programming Site Data
After completing the above steps, the meter returns to the
PROGRAM
prompt. Continue as follows:
•
To continue programming the meter, refer to the menu maps in
Appendix A and navigate to the desired menu. Then, proceed to
the appropriate section of this manual for instructions.
•
Channel PROGRAM
To leave the
[EXIT]
press twice and then press
programming changes will be discarded and you will be returned
.
to the data display
•
Channel PROGRAM
To leave the
[EXIT]
press twice and then press
programming changes will be entered into the meter's memory,
and you will be returned to the data display
March 2008
Channel
and retain the previous settings,
[F1] = NO at the SAVE
prompt. Any
and return to measurement mode,
[F2] = YES the SAVE
at prompt. Your
.
1-15