GE DigitalFlow DF868 Programming Manual page 20

March 2008
Entering System Data for
a Channel (cont.)
1-12
[F1]-[F4]
7. Press to select the desired number of Decimal Digits
(digits to the right of the decimal point) in the volumetric flow rate
display.
[F1]-[F4]
8. Use the and [←] and [→] keys to select the desired
Totalizer Units for the totalized flow rate display.
The option bar above shows English units. If Metric units are
GLOBL
specified in the menu, these will appear instead.
The abbreviations and definitions of all the available totalizer units
are shown in Table 1-3 below. The choices shown on the option bar in
the prompt screen above are determined by the selections made at the
SYSTEM UNITS
previous prompt screen.
Table 1-3: Totalizer Units Options
English Totalizer Units
Gal - U.S. Gallons
MGAL - Mega U.S. gallons
3
ft - Cubic Feet
3
Mft - Mega Cubic Feet
BBL - Barrels
MBBL - Megabarrels
Acre-inches
Acre-feet
[F1]-[F4]
9. Press to select the desired number of Totalizer Decimal
Digits (digits to the right of the decimal point) in the totalized flow
display.
Metric Totalizer Units
L - Liters
ML - Megaliters
3
m - Cubic Meters
3
Mm - Mega Cubic Meters
BBL - Barrels
MBBL - Megabarrels
Programming Site Data