Function Block Application - GE DigitalFlow DF868 Programming Manual
Panametrics multipurpose ultrasonic liquid flowmeter
Hide thumbs
Also See for DigitalFlow DF868:
- Startup manual (82 pages) ,
- Service manual (68 pages) ,
- Programming manual (174 pages)
Table of Contents
Advertisement
March 2008
Function Block
Application
D-6
Figure D-5 below is an example setup using the Function Block
Application editor. The flowmeter AI blocks, along with the AO and
PID of another device on the network, are displayed. We have
connected the AI_1 OUT of the flowmeter to the CAS IN of the AO
block. We have also connected the AI_2 OUT of the flowmeter to the
CAS IN of the PID block.
Figure D-5: Function Block Application
Foundation Fieldbus Communications
Advertisement
Table of Contents
