GE DigitalFlow DF868 Programming Manual page 31

Temperature Inputs (cont.)
Programming Site Data
•
If you selected Fixed, enter the known fixed process
Temperature and press
from -328° to 1,832°F (-200° to 1,000° C).
•
If you selected Slot X, press
temperature input.
b. At the Temperature Input Return prompt, press
constant temperature value or press
card in Slot x that will supply the live temperature input.
•
If you selected Fixed, enter the known fixed process
Temperature and press
from -328° to 1,832°F (-200° to 1,000° C).
•
If you selected Slot X, press
temperature input.
5. If you have not enabled Temperature Compensation, continue to
Procedure Options on the next page. Otherwise, complete the
steps below.
a. At the Fluid Temperature Input prompt, press
constant temperature value or press
in Slot x that will supply the live temperature input.
•
If you selected Fixed, enter the known fixed process
Temperature and press
from -328° to 1,832°F (-200° to 1,000° C).
•
If you selected Slot X, press
temperature input.
The DF868 returns to the Channel Program prompt. Table 1-12
below lists low and high limits for I/O parameters.
Table 1-12: Limits for I/O Parameters
Parameter
CHAN 1/2
Zero Cutoff
Temperature Input
GLOBL
Min. Pulse ON Time
Full Scale Frequency
[ENT]
. The meter only accepts values
[F1] [F4]
to to select the desired
[Fx]
to select the option
[ENT].
The meter only accepts values
[F1] [F4]
to to select the desired
[Fx] to select the option card
[ENT].
The meter only accepts values
[F1] [F4]
to to select the desired
Low Limit
0 1 ft/s (0.3 m/s)
-328°F (-200°C) 1,832°F (1,000°C)
50 µsec 500,000 µsec
1
March 2008
[F1]
to enter a
[F1]
to enter a
High Limit
10,000
1-23