Clearing Totalized Data; Deleting Site Files - GE DigitalFlow DF868 Programming Manual

March 2008

Clearing Totalized Data

Deleting Site Files

5-2
TOTAL
The submenu permits the user to reset volumetric totals to zero
and to reset the stopwatch totalizer. Press the appropriate side of the
[SCREEN]
key to activate the desired pane of the display screen, and
complete the following steps:
1. To access the Clear Menu, press the
a. If you have activated the security feature (see Chapter 1,
Programming Site Data, page 1-63 for details), enter the
assigned password and press
[F1] TOTAL
2. Press = .
[F1]
3. Press to abort the procedure or press
volumetric totals and reset the stopwatch totalizer. In either case,
the initial Clear Menu prompt returns.
SITE
Use the submenu to clear site files from the DF868's memory.
[SCREEN]
Use the key to activate the desired display pane, and refer to
the menu map in Appendix A, page A-8 while completing the
following steps:
1. To access the Clear Menu, press the
a. If you have activated the security feature (see Chapter 1,
Programming Site Data, page 1-63 for details), enter the
assigned password and press
[F2] SITE
2. Press = .
3. At the Site Name prompt, use the [←], [→] and
select a site file for deletion. To leave the
[EXIT]
key.
Note: At the
SITE NAME
all site files currently stored in memory.
[F1]
4. Press to abort the procedure, or press
specified site file. If any site files remain in memory, the Site
s.
Name prompt repeat
When all of the stored site files have been cleared or the
SITE NAME
been pressed at the
resumes at this point.
[CLR]
key.
[ENT]
.
[F2]
to clear all
[CLR]
key.
[ENT]
.
SITE
prompt, the option bar shows the names of
[F2]
prompt, the programming sequence
[F1]-[F4]
keys to
submenu, press the
to Clear the
[EXIT]
key has
Clearing Data