4.4.2 Installation with Ducts
The Heat Pump is prepared to install ducts with diameter of 160 mm and 190 mm, in its air intake
and extraction zones:
Rigid duct
Flexible duct
1) Considering 90° curves and louvers at the air inlet and outlet of the equipment.
If ducts are used, directing the air flow to areas that do not require heating, there are some options:
Using Outside Air
If outside air is used, the unit may be placed
either in a heated room or in an unheated
room.
Inner Ø 160 mm
Max Length Ducts
1)
m
1)
m
Outer Ø 190 mm
Ø 160
24
12
Ø 190
40
20
- 14 -