Table of Contents
Advertisement
5.6
ADDITIONAL FUNCTIONS
5.6.1 Disinfection Mode
The Monobloc electronic control features the Disinfect function, which consists of a water heating cycle up
to 65 °C, for a period of time long enough to prevent the formation of germs inside the tank. The Disinfect
function can be set automatically or manually. In automatic mode, the user has the possibility of setting
the function every week or every month. When automatic mode is not activated, the user must activate
it manually on the key Disinfect.
At the end of the function, the system returns to the operating mode that was selected at the beginning.
5.6.2 Vacation Mode
To activate the vacation function, you need to access the menu and set the number of days on holiday
that you wish, and your equipment will automatically enter Standby mode until the last day of holidays.
On the last day, the equipment will begin the Disinfect function to eliminate any formation of germs
that appeared in the storage water heater during the time you were absent.
After the holidays and once the program Disinfect is over, the equipment will resume the mode selected
(ECO, AUTO or BOOST).
Note: If you set your equipment to enter Vacation mode and turn it off with the key ON/OFF, the function
becomes inactive. When you return from your holidays you must remember to switch on your equipment
and cancel the days of holidays introduced (Value=0). If you do not carry out this operation, your equipment
will not restart until the days of holidays selected have expired.
5.7
MENU
Every time it becomes necessary to alter or set new parameters in the running of the equipment, the user
must access the Menu.
To access the menu, the key MENU must be pressed for 3 seconds. After access use the keys COMP ▲ and
E-HEATER ▼, to navigate the menus and submenus. In order to confirm values / parameters press the key
OK/LOCK. Press the key CANCEL to exit the menu.
5.8
CHANGING THE MODE
The equipment is set by default to work in the "ECO" operating mode. If the user wishes to alter the operating
mode, they must follow these procedures:
Unblock the keyboard and press the key MENU must be pressed for 3 seconds. Using keys ▲ ▼ run through
menu and select F03, access submenu and select the operating mode.
Note: In order to change the operating mode, is not necessary to reinitiate the equipment.
- 29 -
Advertisement
Table of Contents
