General General Installation VPB 500 UK is a water heater which is suitable for con- The hot water heater is unscrewed from the pallet and nection to heat pumps. lifted into position, use the lifting eyes if necessary. The water heater must be installed in an upright position.
When the water heater and the heating system have discharge pipe must be routed downwards to prevent been filled with water, VPB 500 UK must operate at maximum normal temperature for at least one hour. Thereafter the system must be drained of water and refilled.
Do not modify or reconnect! Separate supply from group central is routed to the im- mersion heater. Note! The water heater must be completely filled with water before it is connected on the electrical side. VPB 500 UK 5 5 5...
When mounted in locations exposed to the risk of frost, the hot water heater must be emptied whenever not in operation. Freezing will result in the heater bursting. 6 6 6 VPB 500 UK...
Gross weight Part no. 083 221 * With a supply temperature of 10°C and hot water usage of 24 l/min. Energy labelling Supplier NIBE Model VPB 500 UK Energy efficiency class Heat loss Volume 8 8 8 VPB 500 UK...