Table of Contents
Advertisement
5.9
NUMBER OF SHOWERS AVAILABLE
The user can consult the number of showers available on the home page of the graphical interface (display)
by using a volume of hot water at a temperature of 40 °C or more.
On the initial page of the display, the parameter mentioned in this chapter will be displayed by resorting to
the icon of a shower, with the number indicating the number of showers being positioned below.
Relevant considerations:
•
The illustrative set presented above will not be visible on the display whenever the water
temperature inside the tank is below 38 °C;
•
The number of available showers is calculated considering that one shower is approximately
equivalent to a consumption of 50L of domestic hot water;
5.10 CONSULTATION OF PROBE TEMPERATURES (S1, S2, S3)
As shown below, on the initial page of the display it is possible to consult the temperatures of the probes:
•
S1 – Water temperature probe
•
S2 – Room temperature probe
•
S3 – Evaporator temperature probe
In order for the user to be able to view these parameters, it is sufficient to select the keys on the display
initial page ▲ ▼.
- 30 -
Advertisement
Table of Contents
