GCC Technologies Elite 12/1200N Installation Manual page 88

C C
O G
G O L
H N
E C
T
GCC strongly recommends that you use the straight-through paper path when printing
envelopes (see next section).
When you close the multipurpose feeder, first move the paper guide back to the right side.
Then fold the extension and slide it back into the main part of the feeder. Now close the
cover; this lifts the feeder back to the upright position.
N :
OTE
If you are using legal-size paper, you may need to support the stack to help it
feed properly.
S -
TRAIGHT THROUGH PAPER PATH
This gives you a straight-through paper path (which you need for envelopes and thicker
media) in conjunction with the multipurpose feeder. You can change the output from the
top to the rear in the printer software.
On the Macintosh, select "Printer-specific Options" or "Features" in the Print dialog box. In
Windows 95 and 98, in the printer properties choose the Device Options tab and then look
in Printer Features.
86
IE S
A5 B5 A4
3. When the extension is fully extended, lift the
tab up and toward you so that the folding part
of the extension is in place.
4. If necessary, slide the paper guide so that it
lays against the edge of the paper.
5. Insert paper (or other media).
Insert letterhead face up with the top toward
the printer. Insert envelopes face up with the
flap down and to the right.