GCC Technologies Elite 12/1200N Installation Manual page 72

C /R
ANCEL
You use the Cancel/Reset key:
• To cancel a PostScript job that is either processing or waiting to print.
• To reset the control panel menu and submenu settings to the factory
M
ENU KEY
You use the Menu key to get to the menu system. First, you must press the On
Line key to take the printer off line. You can only get to the menu system when
the printer is off line.
You'll use the printer's menus if you need to configure printer functions or get in-
formation about current settings. Full details of menu settings are on the Elite 12
Series CD-ROM.
Note: You'll only need to change the settings on the menus if you have
specialized printing or connection needs. The factory settings suit most users.
E
NTER KEY
You use the Enter key:
• To see submenus.
"Press Enter..." appears in the display window to prompt you to press the Enter
key to see a submenu(s).
• To save changes when you change main menu or submenu settings.
After you make a change to a main menu setting or submenu setting, press
the Enter key to save the new setting. An asterisk (*) will appear in the
display window to the right of the setting to confirm that the new setting
has been saved.
• To find out which port is being used for the current print job.
Press the Enter key when the Elite 12 Series is processing a job (the Comm LED
is flashing). The LCD display window shows the name of the interface port that
is receiving data.
+ –
AND
You use the + and – keys to move through main menu and submenu settings.
You can use these keys only when the printer is off line.
70
ESET KEY
settings (the printer must be off line).
KEYS