GCC Technologies Elite 12/1200N Installation Manual page 79

ROM
SIMM
Notch
Remove
RAM
SIMM
RAM RAM
Socket SIMM
Notch
Install
RAM
SIMM
10. The ROM and RAM cards are at the right of
the controller board. Remove the ROM card
to get better access to the RAM slots.
(Your controller board may vary from the
one shown)
a. Place your index fingers under the back
edge of the ROM card.
b. Using your thumbs, slowly push the two
retaining clips outward until the clips clear
the top surface of the ROM card.
c. Pivot the ROM card away from the
retaining clips and remove the ROM card
from the socket.
d. The ROM card has a notch in it; this must
be at the top of the contacts when you
reinstall it.
e. Put the ROM card in a safe place; after
you have installed the RAM you will need
to reinstall it.
77