GCC Technologies Elite 12/1200N Installation Manual page 31

I
NSTALLATION FOR
If you intend to use LPR, your GCC printer must be configured through its control panel.
Your System Administrator may need to perform the installation.
Before installing this software, be sure that the printer is connected to the Mac using the
appropriate cable and that both the printer and Mac are powered on. Also confirm that all
the steps in the Hardware Setup section of this manual have been followed.
These instructions show Mac OS 8.6. If you are using OS 8.5.1 or earlier, some instructions
are slightly different.
P C
RINTERS ONNECTED BY
LPR
1. Repeat Part One (steps 1-11 on pages 19-21)
- Installing the GCC driver software and fonts
for Printers Connected by USB.
2. In the window on your Macintosh screen,
double click the "Setup your GCC Printer"
icon.
3. The "New Desktop Printer" dialog box opens.
4. Click on the "Printer (LPR)" item in the list.
Click OK.
29