GCC Technologies Elite 12/1200N Installation Manual page 68

S 10. V
TEP
The easiest way to verify that the installation has been completed successfully is to print a
document from a software application.
1. Load a software application of your choice and open or create a simple document.
2. Make sure the correct printer driver is selected.
3. Print the document.
If the document prints, installation is complete. If nothing printed, repeat steps 1 -9
and/or refer to the Maintenance and Troubleshooting section on page 87
of this guide. If you still have difficulty getting a document to print contact GCC technical
support at 781.276.8620 (U.S. only; outside the U.S. refer to the back cover) or
www.thevirtualprinterstore.com or contact your authorized GCC dealer.
66 66
ERIFY PRINTER SETUP