GCC Technologies Elite 12/1200N Installation Manual page 43

The installation is complete and you can now print to your GCC printer.
10. The software installation will now commence.
You may be asked to insert either the
Windows 98 CD-ROM, floppy disk or the Elite
12 Series CD-ROM. The kind of disk you need
depends on whether Windows 98 was
originally installed from a CD-ROM or from
floppy disks.
• If you are prompted to insert a CD-ROM,
remove the Elite 12 Series CD-ROM, insert
the Windows 98 CD-ROM and click OK.
• If you are prompted to insert a floppy
disk, insert the appropriate Windows 98
floppy disk into the drive and click OK.
• If Windows can not locate the specified
file, the Copy Files dialog box will appear.
You will need to enter "d:\win98" and
click OK in order to continue.
• If you do not have the Windows 98
software, or the installation halts because
a file cannot be found, go to the section
entitled "Solutions to Possible Software
Installation Problems".
• If you chose to print a test page,
Windows will ask if the test page printed
properly. Click Yes. (assuming the test
page printed correctly.)
• If you are installing the software using
Plug and Play, click Finish.
41