GCC Technologies Elite 12/1200N Installation Manual page 51

10 The software installation will now commence.
You may be asked to insert either the
Windows 95 CD-ROM, floppy disk or GCC
Elite 12 Series CD-ROM during this step. The
kind of disk you need depends on whether
Windows 95 was originally installed from a
CD-ROM or from floppy disks.
• If you are prompted to insert a CD-ROM,
remove the Elite 12 Series CD-ROM, insert
the Windows 95 CD-ROM and click OK.
• If you are prompted to insert a floppy
disk, insert the appropriate Windows 95
floppy disk into the drive and click OK.
• If Windows can not locate the specified
file, the Copy Files dialog box will appear.
You will need to enter "d:\win95" and
click OK in order to continue.
• If you do not have the Windows 95
software, or the installation halts because
a file cannot be found, go to the section
entitled "Solutions to Possible Software
Installation Problems".
• If you chose to print a test page,
Windows will ask if the test page printed
properly. Click Yes (assuming the test
page printed correctly.)
• If you are installing the software using
Plug and Play, click Finish.
49