GCC Technologies Elite 12/1200N Installation Manual page 58

56 56
2. At the end of the setup program you will be
asked if you want to create a port. If you do
not want to create a port, click No, Restart
Windows and go to step 7.
3. If you click yes, you will see a dialog box that
gives you the opportunity to change the port
name. Enter the Port Name or accept the
default listed under LPR port name. You must
enter the IP address. Enter the whole IP ad-
dress of the printer including all periods.
• If the printer already has an IP address,
is powered on, and is connected to the
network, you can check that it is recog-
nized by clicking on the Check
connection button.
4. If the printer is recognized you will see a
dialog box saying "Remote printer respond-
ed." Click OK in that dialog box.
5. Click OK in the Add LPR port dialog box. You
will see a dialog box that tells you that the
port was successfully created. Click OK.