GCC Technologies Elite 12/1200N Installation Manual page 29

6. A dialog box called "Untitled 1" opens.
7. There are two buttons marked "Change."
Click on the lower "Change" button.
8. A dialog box called "AppleTalk Printer" opens.
If you do not see your printer in the list
choose the correct Zone. Click on your
printer, then click the "OK" button.
9. You return to the "Untitled 1" dialog box.
10. Click on the "Auto Setup" button. If you are
using OS 8.5.1 or earlier, click on the upper
"Change" button, select your printer from the
list, and click the "Select" button.
27