GCC Technologies Elite 12/1200N Installation Manual page 62

A
DDING PRINTER PORTS USING THE
If you did not create a printer port when you installed the LPR utility or you want to add
another LPR port for an additional printer, you can do this in the Printer Properties dialog box.
1. Click the Add port button in the Details page of the properties dialog box of the
printer you wish to use with LPR.
2. In the dialog box select Other, then choose "GCC LPR printer."
3. You will see a dialog box that gives you the opportunity to change the port name if
necessary. You must enter the IP address. Enter the entire IP address of the printer
including all periods.
4. If the printer already has an IP address, is switched on, and is connected to the net-
work, you can check that it is recognized by clicking on the Check Connection but-
ton. If the printer is recognized you will see a dialog box saying "Remote printer
responded." Click OK in that dialog box.
5. Click OK in the Add LPR port dialog box. You will see a dialog box that tells you that
the port was successfully created. Click OK.
You have now created an LPR printer port. Remember you will need to set the printer's
properties before print jobs will be correct.
60
W P
INDOWS RINTER
P
ROPERTIES DIALOG BOX