GCC Technologies Elite 12/1200N Installation Manual page 52

S
OLUTIONS TO POSSIBLE SOFTWARE INSTALLATION PROBLEMS
In some cases you may not be able to complete the software installation process when you
click the Finish button in step 9 of the Windows 95/98 installation. Normally, the program
stops and asks you to insert a Windows 95 or Windows 98 CD-ROM or floppy disk. Once
you have removed the Elite 12 Series CD-ROM (if necessary) and insert the Windows 95/98
disk, the program continues and the installation is complete.
Two things may prevent this:
• You may have a Windows 95/98 computer that was not supplied with the program
on floppy disks or CD-ROM.
• In some cases you may find that after you have inserted the Windows 95/98 CD-
ROM in the drive and clicked OK, the printer installation does not continue and
you're prompted to insert the Windows 95/98 CD-ROM again.
The installation process requires you to install files that are found on the Windows 95/98
CD-ROM or disks. Some versions of the Windows 95/98 CD-ROM have these files in
different places than others, and you have to show the install program where these files are
located.
If you use the original Windows CD-ROM that came with your computer this problem
should not arise.
50