Base Control Console - Skyjack SJ45 AJ+ Operation Manual

Section 3 – Familiarization

3.3-5 Base control console

Refer to Section 3.1 for the location of the base control
console.
Circuit breaker: If a power overload or positive
1
circuit grounding occurs, the circuit breaker
comes out. Push the circuit breaker back into
the initial position to reset the power.
Hourmeter: This display shows the hours of
2
operation.
7
Capacity zone border light (SJ60 AJ+ only):
3
This light shows the MEWP is at the limits of
travel for the high-capacity zone. The lower and
extend functions are not available.
7
High-capacity zone indicator (SJ60 AJ+ only):
4
This light shows the MEWP is in the high platform
capacity zone. Refer to
7
Low-capacity zone indicator (SJ60 AJ+ only):
5
This light shows the MEWP is in the low platform
capacity zone. Refer to
7
Riser raise/lower: This switch controls the raise
6
or lower function of the riser.
Platform rotation: This switch controls the left or
7
right rotation of the platform.
238264AAA
24
1 2
4
12.5 m/s (28 mph)
5
16
17
TM
15 14
Section 7.8.
Section 7.8.
3 6 7 8
13
Turret rotation: This switch controls the left or
8
right rotation of the turret.
Platform-leveling override: This switch
9
overrides the automatic platform-leveling function
and controls the tilt up or tilt down function of the
platform.
7
Jib up/down: This switch controls the up or
1 0
down movement of the jib.
7
Boom extend/retract: This switch controls the
1 1
extension or retraction of the boom.
7
Main boom raise/lower: This switch controls the
1 2
raise or lower function of the main boom.
Emergency-stop: This button disconnects power
13
to the control circuit and stops the engine. Pull to
connect the power again.
Control functions
9
10
11
12
SJ45 AJ+, SJ60 AJ+