Table of Contents
Advertisement
Section 4 – Pre-operation
2
3
5
4.2-7 Engine Compartment
Ensure compartment cover is secure and in
▪
proper working order.
WARNING
Beware of hot engine components.
Engine Oil Level on Dipstick
1
Maintaining the engine components is essential
to good performance and service life of the
telehandler.
Oil level should be between the "L " low and
▪
"H" high marks. Add oil as needed. See
Section 7.4
for recommended oil type.
Engine Coolant
2
WARNING
Pressurized fluid present in radiator. Never open
radiator cap when hot.
Check coolant level on radiator.
▪
Add coolant as required.
▪
Belts
3
Ensure belts are in good working condition
▪
and have correct tension. Replace if belts are
cracked, frayed, or have chunks of material
missing. Refer to service manual for proper
replacement procedure.
229076ABA
42
.
Visual & Daily Maintenance Inspections
Hydraulic Oil Pump
4
Ensure there are no loose or missing parts and
▪
there is no visible damage.
Ensure all bolts are properly tightened.
▪
Ensure all fittings and hoses are properly
▪
tightened and there is no evidence of hydraulic
oil leakage.
Fuel/Water Separator
5
Ensure there are no loose or missing parts and
▪
there is no visible damage.
Ensure all fittings and hoses are properly
▪
tightened and there is no evidence of fuel
leaks.
Drain water by opening water drain plug at
▪
bottom of filter. Close tightly after inspection.
4.2-8 Transmission
Ensure transmission shifter is working properly
▪
and there is no evidence of damage.
Check oil level on Transmission Oil Dipstick
6
:
1. Place the transmission range selector to "N"
neutral and engage parking brake switch
2. Oil level must be in the "safe" zone. Add oil as
needed. See
Section 7.4
type.
SJ1044 TH, SJ1044 THS, SJ1056 TH, SJ1056 THS,SJ1256 THS
1
4
6
.
for recommended oil
Advertisement
Table of Contents
