LABORIE MMS Solar Blue User Manual page 24

Figure 2.9 The Consumables traceability dialog box
This feature registers what catheters and infusion pump tubing (type and lot
number) have been used for each study and patient. It also will warn when
consumables are about to expire as well as ensure that single-use
consumables are not reused on other patients.
To have an unobstructed view of the graphs, you can close the Consumables
traceability dialog box at any time by clicking the close button (X) in the
upper-right corner. You can reopen it by clicking the RFID button on the
toolbar.
Scanning consumables
The Solar Blue software keeps track of your inventory in a repository, which is
displayed in the Consumables traceability dialog box. It's easy to add
consumables. With the Consumables traceability dialog box open, place the
RFID tag affixed to the box containing the consumables on top of the RFID
reader; the software will read the tag's information and add the contents of the
box to the repository. You will see a notification in the Scan log section
specifying which consumables have been scanned and added, and you will
see the newly scanned consumables in the Repository available section.
24 Solar Blue User Manual Chapter 2