LABORIE MMS Solar Blue User Manual page 167

Buttons Description
Select the proper EMG scale; the size of the EMG graph is
increased.
Activate the pause mode.
Insert an event marker. It is also possible to add comment
for the marker.
Zero the detrusor pressure (P ) during the pre-test and, if
det
necessary, during the measurement.
During the pre-test with the urethral sensor in the bladder,
you can use this button to equalize the urethral pressure
(P ) and the vesical pressure (P ).
ura ves
Mark spontaneous miction.
Mark a leak point (gynecology test).
Start and stop the catheter puller (wireless) during pretest
and investigation.
Move the catheter puller and the puller clamp in the direction
of the bladder or out of the bladder.
Toggle online review mode on/off. Half of the screen
displays the curves and markers of the measured data up to
that moment. It is possible to move the markers by clicking
and dragging.
Refresh button (will also function as 100% button). This
button appears when the online review mode is switched on.
Activate/deactivate Virtual remote control.
Measurement Program Solar Blue User Manual 167