LABORIE MMS Solar Blue User Manual page 184

The settings are described here:
Display
These are specific settings for graphs and markers; for example, how to
display a grid and show the markers as full names. If you select Vertical
marker names, marker names will be displayed vertically instead of
horizontally, which prevents marker names from overlapping. If you select
filled chained markers, chained markers such as begin and end markers for
resting pressure will be displayed with a colored background from begin-
marker to end-marker.
If you select Display maximum value, the maximum measured value will be
displayed during the investigation. All displayed maximum values can be reset
to the actual value during the investigation by clicking the maximum value. You
can also add the investigation memo and/or conclusion tool button to the
toolbar so that comments can be entered during the investigation.
Investigation settings
You can save investigation data at certain intervals during the investigation to
secure the data. Select the Auto save checkbox and enter during which
interval the measurement data must be saved. You can also set the scroll
mode and the position of the channel information.
You can change the position of the channel information. The default is at the
right side of the screen.
Under Options, the options for your measurement system are enabled. You
can find more information in the Solar Blue Service & Installation Manual.
EMG
You can set the display for the EMG graphics. Also, settings for signal
processing are available. You can choose Slow average (default), Fast
average, or Peak amplitude (in case you want the fastest response of the
EMG channel without a filter).
Colors
You can change the colors of the various items displayed on the screen, such
as artefact, background, baselines, cursor, and grid. Select the object and click
on the new color. You can also define a set of graph colors. These colors will
be selectable in the channel settings. When you have defined all colors, save
184 Solar Blue User Manual Chapter 12