LABORIE MMS Solar Blue User Manual page 169

Figure 12.4 RC-1200 diagram
RC-1200 Name
keys #
1–4 Keys
5–8 User-definable
markers
9 Pump speed
up
10 EMG up
11 Scale up
12 Up
13 Pump on/off
14 EMG down
15 Scale down
Measurement Program
Description
The function of these keys varies throughout the
program. The function is indicated on the screen buttons
during the investigation.
These buttons are used to place user-definable markers
during an investigation. When you simultaneously press
SHIFT, you can place delayed markers; otherwise,
immediate markers.
Change the pump speed during the investigation or the
pre-test with the up key.
Select the sensitivity for the EMG 1 channel.
Select the sensitivity for the pressure channel.
Menu up.
Toggle switch to control the pump. The pump status is
shown on the Pump button in the software.
Select the sensitivity for the EMG 1 channel.
Select the sensitivity for the pressure channel.
Solar Blue User Manual 169