Table of Contents
Advertisement
Application Guidelines
Using Smart CLI
The Smart CLI commands can be executed from a hyperterminal connection, a password-protected
Telnet connection or at the web interface. When using CLI at the web interface, be aware that you
will not be able to execute those commands that are restricted to the ADMIN mode.
The SC-ADT command line interface is composed of commands, zero or more subcommands and
zero or more arguments. The general syntax of a command entered at the command prompt is:
command
Finding Commands and Subcommands
Use the ? character to get a description of commands available, or at any time in the command
line to get context help. The syntax of a help description is:
command
parameter(s)
•
When you type the ? character at the beginning of a command line, the screen displays all the
commands available along with a one line description of each command:
ADT-16%> ?
______________________System Commands____________________________________
clear
configure
connect
default
disable
enable
help
ping
show
telnet
trace-rte
_______________________Utility Commands___________________________________
batch
chat
contact
diags
exit
find-alert Find port alert string by port
flash
reboot
netstat
services
who-am-i
|_______________________Notes______________________________________________
Commands may be abbreviated. Command text expands when space is entered.
Use "?" at any time on the command line to get help. Use CTRL-C to abort
command line. Use Up/Down arrow keys to recall previous command lines.
076R172-000
Issue 6
if any
<subcommand(s)>
Brief description of command or subcommand
description, if any, for the command or subcommand
Reset functions
Configure system parameters
Connect to terminal port or modem
Default configuration to factory values.
Turn off supervisor/admin commands
Turn on supervisor/admin commands
Description of the command line interface and help system
Send ping to remote device
Show system parameters
TELNET to remote device
Trace route packets take to remote device
Store and/or run commands in batch mode
Start/Answer chat session with another ADT CLI user
Turn contact on or off
Set/Show port loopback state
Exit Command Line Interface
Copy flash files/select flash boot file
Halt and perform a reboot
Show TCP socket connections
Show/Enable/Disable HTTP, SNMP, TELNET, SSH, TFTP & FTP Service
Show current user name
SpectraComm ADT
Installation and Operation Manual
<required argument(s)>
Using Smart CLI
if any
A-7
Advertisement
Table of Contents
