Table of Contents
Advertisement
Additional Features
Modem Security
When SC-ADT is equipped with an internal modem, the default mode is autoanswer. The unit
also supports callback mode. In this mode, the modem is configured with a list of callback
locations and phone numbers. With modem authentication enabled, the username and password is
enforced. Security is enhanced when caller ID locations and phone numbers are configured.
•
For help in setting modem security parameters, type any of the following commands:
configure modem callback
configure modem mode
configure modem use
configure modem caller-id
configure modem authen
configure modem inactivity
•
To show the status of modem security parameters, type any of the following commands:
show modem callback
show modem mode
show modem use
show modem caller-id
show modem authen
show modem inactivity
___________Help for "configure modem callback "______________________
add
delete
authen
___________Help for "configure modem mode "______________________
auto-answer
callback
___________Help for "configure modem use "______________________
internal
external
bypass
___________Help for "configure modem caller-id "______________________
add
delete
validate Caller-id enable/disable
____________Help for "configure modem authen "______________________
enable
disable
___________Help for "configure modem inactivity "______________________
inactivity
interface name (modem0 or modem1)
inactivity timer in seconds( use 0 to disable )
___________Help for "show modem "______________________
callback
mode
use
bypass
caller-id
authen
inactivity
Figure 5-2
5-6
Add/Change callback location and phone number; requires 3 parameter(s)
Delete callback location and phone number; requires 2 parameter(s)
Authentication on callback enable/disable
Set modem mode to auto-answer; requires 1 parameter(s)
Set modem mode to callback; requires 1 parameter(s)
Set modem use to internal; requires 1 parameter(s)
Set modem use to external; requires 1 parameter(s)
Set modem use to bypass; requires 1 parameter(s)
Add/Change caller-id location and phone number; requires 3 parameter(s)
Delete caller-id location and phone number; requires 2 parameter(s)
Enable modem authentication; requires 1 parameter(s)
Disable modem authentication; requires 1 parameter(s)
Set Dialup Networking inactivity timer; requires 2 parameter(s)
Show modem call back configuration
Show modem operation mode; requires 1 parameter(s)
Show modem use for internal/external/bypass; requires 1 parameter(s)
Show bypass parameters; requires 1 parameter(s)
Show modem caller-id list
Show modem authentication type; requires 1 parameter(s)
Show Dialup Networking inactivity timer; requires 1 parameter(s)
Help and Status Displays for Modem Security Features
SpectraComm ADT
Installation and Operation Manual
Modem Security
076R172-000
Issue 6
Advertisement
Table of Contents
