Table of Contents
Advertisement
The Web Interface
Command Line Web Screen
Commands entered at the Command Line web screen operate exactly the same as at the telnet/
terminal CLI interface. The Command line web page displays a series of tables that allow users and
supervisors to execute commands and associated arguments by clicking on the links in the table.
The top level command menu is shown below.
•
When you click a command from the menu, any required arguments for that command appear.
•
To return to the command line top menu from any argument screen, use your web browser's
Back button or click the Top Menu link at the bottom of an argument table.
•
For a detailed guide to CLI, click on the help menu item. A table of command default settings
is also provided in
clear
configure
help
show
reboot
netstat
services
logout
Table 4-1
Command Line Web Screen
Field
clear
configure
(Supervisor Access Only)
help
show
reboot
(Supervisor Access Only)
netstat
services
logout
Note
Supervisor Access is required for
commands will not be displayed.
Configuration commands that are restricted to ADMIN mode are not available at the web interface. To
access/execute those commands, you must log out of the web interface and make a Telnet or terminal
connection in ADMIN mode.
076R172-000
Issue 6
Table A-1
in
Appendix A, Application Guidelines
YOUR SYSTEM NAME (172.16.45.204)
Reset functions
Configure system parameters
Description of the command line interface and help system
Show system parameters
Halt and perform a reboot
Show TCP socket connections
Show/Enable/Disable HTTP, SNMP, SSH, TELNET, TFTP & FTP Services
End this web session
Displays a selectable list of sub-commands that will clear arp-cache entries and
counters on one or more ports.
Displays a selectable list of sub-commands that are used to configure port and
operational parameters.
Displays a read-only display describing online help, the command access
modes, some common sub-commands and arguments, and information on
downloading configuration batch files.
Displays a selectable list of sub-commands that show SC-ADT status and
several operating and configuration parameters.
Halts SC-ADT operation and performs a reboot using existing configuration.
Displays local, remote IP addresses, and shows status and statistics on current
TCP socket connections.
Displays the status of HTTP , SNMP , SSH, TELNET, TFTP & FTP services
(Enabled o
d)
r Disable
Logs out of the session and returns to the AC-ADT login authorization screen.
configure
and
SpectraComm ADT
Installation and Operation Manual
Introduction to Web Management
Description
reboot
commands, i.e., with User Access those
4-3
Advertisement
Table of Contents
