Automation Dr. Nix QNix 9500 Operation Manual page 34

QNix 9500
®
5.6. Set PIN
You can add a 4-digit PIN to lock certain device functions.
Open the „Settings" menu, select „System" and press OK to confirm.
•
Press OK to confirm „PIN".
•
• Enter the 4-digit PIN with the
• Press OK to apply the PIN.
Notice Impacts of using a PIN
Entering and confirming the PIN will lock ALL configured measurements options. You can still
configure the system settings. You will also still be able to add or edit jobs. The PIN can be reset in
the QN9 software or by entering it again.
5.7. Set Date / Time
The format for date and time is YYYY-MM-DD-hh-mm
Open the „Settings" menu, select „System" and press OK to confirm.
•
Press OK to confirm „Date / Time".
•
• Set date / time with the
5.8. Configure Softkey
The softkey can be programmed to two functions, „Calibrate" and „Advance area".
Open the „Settings" menu, select „System" and press OK to confirm.
•
Select „Configure softkey" and press OK to confirm.
•
Select the desired setting and press OK to confirm.
•
34
or buttons.
buttons and press OK to confirm.
or