Changing Units - Automation Dr. Nix QNix 9500 Operation Manual

5.3. Set Buzzer
You can change the volume and the touch sound.
Open the „Settings" menu, select „System" and press OK to confirm.
•
Press OK to confirm „Buzzer".
•
Select „Volume" and press OK to confirm. Adjust the volume in the submenu
•
and press OK to confirm.
Press OK to enable or disable the „Touch sound".
•
5.4. Configure Power Save Option
To extend the life of the batteries you can configure, when the backlight will dim and the device shuts off.
If no button is pressed or measurement taken during the set display time, first the backlight will dim. Then
the device will shut off completely.
Open the „Settings" menu, select „System" and press OK to confirm.
•
• Press OK to confirm „Power save options".
Select „Display" or „Off" and press OK to confirm.
•
• Set the desired time in seconds with the
Press OK to confirm your entry.
•
5.5. Change Unit
You can select the unit, measurements are displayed in.
Open the „Settings" menu, select „System" and press OK to confirm.
•
Press OK to confirm „Unit".
•
Select „μm" or „mil" and press OK to confirm.
•
Notice

Changing units

When changing the unit, all values (including previous measurements) will be converted and
displayed accordingly.
or buttons.
33