Limit Settings - Automation Dr. Nix QNix 9500 Operation Manual

To do measurements by using the specific limit settings, the following steps must be carried out:
• Select the first of the areas to be filled in and activate it.
• Do your measurements. If the area automatic within the limit settings is active, the next area
will be activated automatically when you reach the number of measurements set in the area
automatic.
• If you do not want to change the area, please deactivate area automatic within the limit
settings. In this case, area changes have to be done manually when reaching the desired
number of measurements.
• When the last area, available with area automatic, has been reached, it will be filled in when
measuring is continued. Then, if area automatic is active, a new area with identical limit
settings is generated, selected and filled in when continuing the measurements.
Notice

Limit settings

Limit settings of a selected area can be passed over to new generated areas. It is not necessary to
set individual limits.
31