GDC Espedeo Supra Supra-5000 User Manual page 93

d) If the selected
1.
2.
3 Click on the
Please Note: In order to create a quick access button for a particular automation cue that can be
accessed from the Control sub-tab under Dashboard; insert the prefix "q_" before the actual cue
name while creating a new automation cue (For cues that already exist on the DCMB, select the cue
name and use the
Save the changes by clicking on the Save button. A new quick access button should be created under
the Control sub-tab, as shown below:
Supra-5000 Digital Cinema and Secured Media Projection System
User Manual
is 'Projector', then the
Device
If 'Primitive' is selected as the
from the drop-down as shown below:
If 'Macro' is selected as the
the Param value from the drop-down.
Save button to add the new cue or click
Rename option).
Figure 90:
type can be 'Primitive' or 'Macro'.
Action
Action type, you can select the desired
Action type, you can select the desired projector macro as
Discard to remove it.
Table 31
- 93 -
Param value
th
May 05 , 2021