Selecting A Test Pattern - GDC Espedeo Supra Supra-5000 User Manual

SN
1 [Output:]
2 [Preset Test Pattern]
R: G: B:
Supra-5000 Digital Cinema and Secured Media Projection System
User Manual
The Test Pattern option should be selected during projector
setup when the output of the projector needs to be tested.
Refer to Section 4.6.6.1.1 for details on selecting a test
pattern as the image source for the projector.
Table 75
4.6.6.1.1

Selecting a Test Pattern

Figure 136
Function Description
Allows the user to switch the projector to '2D' or '3D' mode when
the test pattern is being displayed.
When enabled, a preset test pattern will be created based on the
color values entered and options selected by the user
These values define the color of the test pattern displayed.
Each field accepts a 12-bit number within the range of 0 to 4095.
- 162 -
th
May 05 , 2021