Using The Dcmb Web Ui To Start Playback - GDC Espedeo Supra Supra-5000 User Manual

Using the DCMB Web UI to start Playback

To initiate playback of content from the local storage of the projector, you need to access the DCMB
Web UI. As depicted in Figure 26 and Figure 27, follow the steps mentioned below:
Step 1: Click on the Playback tab on the menu bar.
Step 2: Access the Playlist Editor screen by clicking on the Edit sub-tab. Here, you can select
the desired playlist that has already been created on the DCMB, from the Playlist drop-down.
Step 3: After selecting the show, click on the 'Load for Playback' button to load the playlist
to the Playback screen.
Step 4: Click the 'Play' button to start the playback of the selected playlist. To fast-forward or advance
to the next clip in the playlist, playback must be paused first. Use the 'Pause' button to pause
playback, before clicking on the 'Previous Clip', Rewind, 'Forward' or 'Next Clip' navigation buttons.
When paused, the timeline slider can be dragged to the desired point and un-paused from there.
However, you cannot rewind or fast-forward a clip by clicking at a particular point on the timeline slider.
Supra-5000 Digital Cinema and Secured Media Projection System
User Manual
Figure 26:
- 25 -
th
May 05 , 2021