Video Path - GDC Espedeo Supra Supra-5000 User Manual

3.2.4.2 Video Path

The Video Path tab is used to detect whether the video channels of the HDMI, IMB and DLP
modules are functioning as expected.
I. HDMI1 module detection
This function is mainly used to detect the HDMI1 module. After the HDMI1 port of the PIB board is
connected to a computer, DVD device or set-top box, select the "HDMI1" icon under the "Video
Path" column. At this time, if the video signals transmitted over the HDMI1 port are displayed
normally, the video channel of the HDMI1 port is normal.
NOTE: This test requires an external HDMI signal source and the resolution is set to
1080p@60Hz.
Supra-5000 Digital Cinema and Secured Media Projection System
User Manual
Figure 41:
Figure 42:
- 41 -
th
May 05 , 2021