Switching ON the Laser Light Source of the Supra-5000
From the Supra Command Center interface, click the Laser On button on the top menu bar to switch ON
the projector's Laser Light Source. The projector State will change to 'Laser On', as shown in Figure 22.
If you want to switch OFF the projector's Laser Light Source, click on the Laser Off button. The projector
State will now change to 'Laser Off'.
You may also project a Test Pattern to make sure that the Laser Light Source has been switched ON
successfully (optional). Refer to Section 1.2.4.1 for more information on projecting a Test Pattern.
Supra-5000 Digital Cinema and Secured Media Projection System
User Manual
Figure 22:
- 21 -
th
May 05
, 2021