SN
Name
Select the desired Target
①
Color Gamut Data (TCGD) file
②
Color type
③
3D device
④
Red
⑤
Green
⑥
Blue
⑦
White
Supra-5000 Digital Cinema and Secured Media Projection System
User Manual
Figure 62
You can select the TCGD file based on the source
▪
For the DCP, select the DCI color file: DCI-P7_x314_y351
▪
For the HDMI, select the rec.709 color file: Rec.709_x3127_y329
For 2D_DCP color calibration, select '2D'.
For 3D_DCP color calibration, select '3D'.
When the color type is set to 3D, you need to select the corresponding 3D
device.
The default 3D device used by the projector is 'DEFAULT-3D'.
To use a new 3D device, choose 3D File Settings → New 3D File and
configure the corresponding control parameters of the new 3D device.
After you click 'Red', the screen displays the Red test pattern. Use a colorimeter
to measure the color coordinates of the current screen center and enter values
of X and Y based on the color coordinates.
After you click 'Green', the screen displays the Green test pattern. Use a
colorimeter to measure the color coordinates of the current screen center and
enter values of X and Y based on the color coordinates.
After you click 'Blue', the screen displays the Blue test pattern. Use a
colorimeter to measure the color coordinates of the current screen center and
enter values of X and Y based on the color coordinates.
After you click 'White', the screen displays the White test pattern. Use a
colorimeter to measure the color coordinates of the current screen center and
enter values of X and Y based on the color coordinates.
- 56 -
Function Description
th
May 05
, 2021